Login
Not sure what you need? Call our expert team phone 0508 444 555
 

Epoxy sealer

100% Solids Epoxy

Product-Coming-Soon-image-600x600-352
Permacolour Epoxy is a two component, high performance modified cycloaliphatic epoxy concrete floor coating system. Its epoxy chemistry provides excellent bonding characteristics. It can be applied as a 300 - 1300 microns coating system. Paint Chips or Colour Quartz can be broadcast into Permacolour Epoxy to create a custom look. Its design features provide for the highest industrial and commercial demands.

The uniqueness and universality of Permacolour Epoxy’s chemistry facilitates the applications where USDA Food & Beverage and other regulatory requirements must be obtained. i.e. food manufacturing and preparation, pharmaceutical manufacturing and dispensaries, clean rooms, commercial kitchens, laboratories and more. Other areas of use include: garage floors, rest rooms, manufacturing facilities, automotive showrooms and schools.

▪Essentially Odourless
▪Self-priming over properly prepared substrate
▪VOC Compliant
▪High Colour Stability
▪High gloss
▪Withstands medium traffic as thin as 300 microns
▪Chemically resistant
▪No amine blush

9m2/gal. at 400 microns

Durability:4 stars-737

Colour Enhancement: 

4 stars-737

Gloss : 5 stars-492



 

Water base Expoxy

Product-Coming-Soon-image-600x600-352 A premium quality 2-component water base epoxy concrete sealer/primer that provides epoxy toughness, chemical resistance and durability with the convenience of a water base VOC free system.

▪Easy water clean-up
▪Long pot life
▪Excellent coverage
▪Fast drying (30min to 2hours)
▪Unsurpassed Adhesion
▪VOC Free



Covarage: 

19m2/gal
 
Durability : 3 stars-41

Colour Enhancement: 

3 stars-41
Gloss : 3 stars-41

 

Polyaspartics

Product-Coming-Soon-image-600x600-352 Permacolour Polyaspartics is the next generation in two component, fast drying, Aliphatic Polyurea. While other Polyaspartics can only be applied between 200 and 260 microns, Permacolour Polyaspartic can be applied in a single coat up to 760 microns. It features good abrasion and chemical resistance, and a cure time of four to six hours. It can be installed in extremely high or low temperatures. It is the ideal product when low odor, fast turnaround and a non-yellowing system are essential.

▪High Gloss & Build
▪4x more abrasion resistant than epoxy
▪Non-yellowing
▪Chemically resistant
▪0 VOC
▪Easy mixing ratio (1:1)
▪Solvent FREE
▪Cure at temperatures just about Freezing
▪Flexible
▪Pharmeceutical
▪Food Prep/Kitchens
▪Garage Floors
▪Restrooms
▪Manufacturing Plants
▪Aisle ways
▪Clean rooms
▪Auto showrooms
▪Schools
▪Laboratories
▪Basements
▪Kennels
▪Veterinary facilities
▪Locker rooms
▪Ramps
▪Health Care facilities
▪Loading docks
▪Car wash facilities

Durability:
4 stars-737

Colour Enhancement: 

3 stars-41
Gloss : 

4 stars-737




 

Metallics Epoxy

Product-Coming-Soon-image-600x600-352 Permacolour Metallic Epoxy is a three component, high performance modified cycloaliphatic epoxy concrete floor coating system. Its epoxy chemistry provides excellent bonding characteristics. Typically applied at a 500 microns thick single coat (7m2/gal). This dynamic blend does not require activator to be sprayed on the surface to obtain a unique and highly decorative look.
The uniqueness and universality of Permacolour Epoxy’s chemistry facilitates the applications where USDA Food & Beverage and other regulatory requirements must be obtained. Areas of use include: garage floors, , Showrooms, Hotel Lobbies & Entryways, Exhibition halls, Restaurants, Retail/Commercial Venues.

▪Essentially odourless
▪create dynamic, exotic look
▪ZERO VOC
▪High gloss & colour stability
▪Low Viscosity ▪Chemically Resistant
▪No amine blush
▪Modified to be highly Ambering resistance

Durability:
4 stars-737

Colour Enhancement: 

4 stars-737
Gloss : 

5 stars-492

Metallics epoxy