Permacolour Metallic Epoxy is an advanced self levelling, self smoothing, high gloss, low viscosity, crystal clear epoxy coating. A Metallic Epoxy floor Coating exhibits exceptional resistance to chemicals and solvents yet is easy to handle and apply because of the materials low mixed viscosity.
Metallic Epoxy has the following properties:
- Exceptional clarity and low colour.
- No crystallising on storage above 10˚C.
- High Gloss.
- Good abrasion resistance.
- Highly chemical resistance.
- Exceptional mechanical strength.
- Exceptional adhesion to concrete substrate.
- High hardness.
- Durable, hard wearing.
- Strong air releasing properties.
- Good anti-crater properties.
- Good blush and bloom resistance.
- Self smoothing.
- Solvent less, non-flammable.
- Virtually odourless .
- Easy application.
- Minimises maintenance costs.
- Easily cleaned.
- Nonylphenol free
Metallic Epoxy is recommended for application onto suitably prepared interior concrete floors.
- Residential floors.
- Retail outlets and warehouses.
- Parking garages.
- Commercial kitchens and bars.
- Schools, colleges, exhibition halls.
- Gaols, fire brigades and police stations.
- Hospitals and nursing homes.
Metallic Epoxy is not recommended for applications where exposure to acetic and lactic acid is commonplace or under direct or continued ultra violet light as discolouration can be experienced.
Product Properties
Solids Content: 100% w/w
Relative Density: Ca. 1.08
Viscosity (@25°ᶜ): Ca. 500-700mPas (at time of mixing)
Pot Life (@25°ᶜ): 26 minutes (100 gram mass)
Recoating time (@25°ᶜ): 12-24 hours
Full Cure time (@ 25°ᶜ): 7 days
Mixing ratio: 2:1 (A:B) byvolume
Coverage: 1 - 1.6 m2/L @ 400-500 µ/coat.
Open to light traffic (@25°ᶜ): 24 hours
Open to full traffic (@25°ᶜ): 72 hours
Storage: Store on a pallet or off the ground at 10-30°ᶜ
STIR PART A WELL BEFORE MIXING
