Product Focus —Metallic Epoxy Coatings


Permacolour Metallic Epoxy

Permacolour metallic epoxy coatings are an advanced self-leveling, self-smoothing, high gloss, low viscosity, crystal clear epoxy coating. A metallic epoxy floor coating exhibits exceptional resistance to chemicals and solvents.


  1. Extremely attractive and unique  finishes achieved
  2. Seamless and hygienic
  3. Easy to clean
  4. Cost effective (when compared to alternative flooring options)

Here we give you a rundown on Metallic Epoxy

#1  What exactly is Metallic Epoxy?

Metallic epoxy is low yellowing, self-leveling epoxy. Metallic powder pigments are mixed into the epoxy resin and then poured onto the floor or substrate.

When these pigments become agitated with a paintbrush or roller, they gather, separate, twist and turn to reflect light at different angles.

The epoxy then hardens and the metallic pigments are locked into place, providing a three dimensional, swirly look.

The installation technique is what determines the final look of the floor and is a critical part in attaining the desired look. Because of the self-leveling and flowing nature of the epoxy, each application is truly unique and no application will ever match another. You cannot duplicate a metallic epoxy coating. Each application is original and has its own peculiarities in design and patterns. It can be difficult to predict the final look of your floor. All we can say is that it will have its own unique beauty.

#2   Ideal solution for renovations and new builds

Metallic Epoxy coatings are ideal for renovations.  It can be applied to a clean, flat concrete surface as well as to fibre cement substrates (this will require some additional prep). In the case of new builds, concrete should be at least 28 days old prior to the application. Metallic epoxy is ideal for use in showrooms, cafés, waiting rooms,  restaurants, galleries, retail stores, offices and for private residences.

#3   It's a specialised application

Metallic Epoxy is not considered a DIY application. Permacolour recommends the use of a trained contractor due to the skills, knowledge and equipment required to achieve a desirable finish.  A unique finish is achieved (this is not a factory produced product, but rather “hand made” in that each applicator has his or her own technique).

#4   Suitable for interior surfaces only

Metallic Epoxy is intended for internal use only. It can be applied to floors, seating areas, and bench tops.

#5  It can be customised

Once the Metallic Epoxy has been applied, it is over coated with Permacolours' clear water based urethane for added protection. Our water base urethane is available in a gloss and matte finish (the two can be mixed to achieve a semi-gloss finish). A gloss water base urethane is the ideal finish to choose in order to achieve the depth and 3D effect of metallic epoxy, whilst a matte finish reduces that effect somewhat. A slip additive can also be added to the water base urethane for added slip resistance where required.

#6   Substrate conditions are important

The success of Metallic Epoxy is determined by the quality of the substrate to which it is applied. For more information, refer to Permacolours' Metallic Epoxy data sheet.

#7   Easy maintenance

Surfaces coated with metallic epoxy are easy to clean and maintain. Simply sweep and mop.

#8   A wide range of colours

Metallic epoxy is available in a range of colours.  Colours can be mixed and used to create an interesting effect. The finished look is mottled in appearance and not uniform. For final colour selection, we recommend a sample be applied for approval. Colours shown on our colour cards (both printed and digital) are to be used as a guide only as there are several factors affecting the appearance of the finished colour.


Leave a Reply