Description
Danley_PaveX_Crack-A-Joint_Product_Guide
As an alternative to traditional saw cutting and tooled joints, PaveX™ Crack-A-Joint™ with Rip-A-Strip™ Capping induces a weakened plane joint to the full depth of the concrete.
Available in profile heights of 25mm and 38mm, PaveX™ Crack-A-Joint™ initiates an immediate joint line in pavement slabs between 75mm and 150mm in depth. Crack-A-Joint™ with Rip-A-Strip™ Capping is easily removeable and provides a clean, laitance-free joint line. Profiles are available with Black or Grey Rip-A-Strip™ Capping.
Co-extruded in UV stabilised uPVC and Flexible PVC Rip-A-Strip™ Capping to 3 metres in length, PaveX™ Crack-A-Joint™ is also suitable for use in pavements in chemically corrosive environments including chlorinated or salt-water swimming pool surrounds and coastal environments.
Typical Uses:
Weakened plane joints in footpaths, bicycle paths, driveways and urban streetscapes.
Features:
• Safety: Reduces the risk of cuts and abrasions caused by sharp edges on traditional steel profiles.
• Immediately initiates a weakened plane joint in the slab when placed in freshly poured wet concrete.
• Finish the slab the same day. There is no need to return the next day for saw-cutting.
• PaveX™ Crack-A-Joint™ will butt up to any given edge, including columns.
• PaveX ™ Crack-A-Joint™ can be placed quickly, with precision.
• Integral Rip-A-Strip™ Capping is easily removeable, and provides a clean, laitance-free joint line. Available in two colours: Black or Grey.
• Lightweight and easy to carry around the job site.
• Profile heights of 25mm and 38mm initiate controlled cracks in slabs between 75mm and 150mm in depth.
• Available in 3m standard lengths.
• Corrosion-Free: PaveX™ Crack-A-Joint™ is extruded from UV stabilised uPVC.
• Reduces the risk of early shrinkage cracking, producing architecturally aesthetic pavements.
• No joint filler required: The edge of the PaveX™ Crack-A-Joint™ profile acts as a support for the edge of the concrete and stops unsightly fraying and spalling.
• Unique profile compliments aggregate interlock which facilitates load transfer.
• PaveX™ Crack-A-Joint™ provides a low-noise transition over weakened plane joints.
• Optional: PaveX™ Crack-A-Joint™ Clip-on Joiners are sold separately.
The Crack-A-Joint Range is available in Black or Grey and the following two sizes, 25mm X 3m or 38mm X 3m, in Packs of 10.
Clip on Joiner 200mm available in packs of 50.
PaveX™ Crack-A-Joint™ complies with the requirements of AS 3727.1:2016 Residential Pavements.
